3ONEDATA 1-channel Video over Fiber Transmitter Receiver(SWV60100)

1)compatible with NTSC, PAL, and SECAM CCTV camera 2)Support any high-resolution video signal 3)CE,FCC,RoHS

1-channel Video over Fiber Transmitter Receiver (SWV60100)

Introduction:

3onedata fiber-optic video transceivers SWV60100 series can simultaneously transmit 1 channel of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.

Features:1.8-bit digitally encoded and non-compression broadcast quality video transmission 2.Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols3.Support any high-resolution video signal  4.Automatic compatible PAL, NTSC and SECAM video system 5.Power supply and other parameter state indication, which can monitor the operation condition of system 6.Support no-damage regenerative trunk of video 7.Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required .8.Special ASIC design .9.Industry-grade of operating temperature from -10°C to 65°C , which is 10.applied to the different working environment11.Hot-swap function

Specifications: Technical SpecificationVideo channels: 1 channelVideo bandwidth: 8 MHzAutomatic compatible video system: PAL, NTSC, SECAMVideo input/output impedance: 75 Ω(unbalance)Video signal-to-noise ratio: ≥67dBDifferential gain: (10%-90%APL) DG <1% ( typical value)Differential phase: (10%-90%APL) DP <0.7° ( typical value)Video connector: BNCFiber-optic SpecificationF/O connector: FC/ST/SCTX : Power:-15 ~ -8dBm   Sensitivity :≤-35dBm RX: Power:-15 ~ -8dBm   Sensitivity :≤-35dBmTransmission Distance :20KM (single mode)Operating Wavelength: TX1310/RX1550nm (Transmitter),  TX1550/RX1310nm (Receiver)Specification of custom-made options1. DataConnector: Terminal BlocksEncoded type : RS485 / RS422 / RS232 / ManchesterData rate : 0 - 400KbpsBER:  ≤10-92. AudioConnector: Terminal BlocksAudio input / output impedance :600ohm(Balance/ unbalance)Audio input / output voltage :2Vp-p ( typical value)Audio input / output level: 0dBm ( typical value)Video bandwidth:10HZ~12KHZAudio digital encoded bandwidth: 24bitAudio signal-to-noise ratio:  S/N≥95dB  (weighted)3. TelephoneConnector: RJ11Bandwidth :8KHZFeatures: Support call-showing function, support H-FOperating mode : Point to point hotline mode / FXS-FXO4. EthernetConnector: RJ45Support mode : Half duplex or Full duplexStandards: IEEE802.3 Data rate : 10M / 100Mbps Bandwidth: 25MCharacteristicDimensions: 11.1(L)×10.7(W)×2.8(H) cm Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )Operating Temperature: -10°C to +65°CStoring Temperature: -45°C to +85°CHumidity: 0 to 95% non-condensingMTBF: ≥10 5 hoursWarranty: 5 yearsApprovals: FCC,CE, RoHS approvals

3ONEDATA 1-channel Video over Fiber Transmitter Receiver(SWV60100)